Minelab 4.8V - 12V NiCAD Battery Charger for Excalibur Series Detector 3011-0439

Minelab 4.8V - 12V NiCAD Battery Charger for Excalibur Series Detector 3011-0439This charger is made for NiCad batteries and is compatible with the Minelab Excalibur 1000, Excalibur 800, and Excalibur II series Metal Detectors.

The Minelab 4.8V - 12V Nicad Battery Charger for NiCad batteries charges the batteries from a wall outlet.

This charger is designed to charge Nickel Metal Hybride or Nickel Cadmium 4 - 10 call battery packs.

It is a microprocessor-controlled smart charger, which can distinguish between 4 - 10 cell packs automatically and cut the charging accordingly.

4 LEDs display for Rapid charge/trickle charge.

Red LEDs Flash - rapid charge

1 LED Steady: 30%

2 LEDs Steady: 50%

3 LEDs Steady: 70%

4 LEDs Steady: 90%

Green LED - Fully charged & trickle charge

Flash Red and Green LED - Short or Reverse polarity or Wrong Battery

When using the charger for Excalibur II models, the charger also requires the Excalibur adaptor plug, to allow the push-in plug to convert to the 3-pin plug of the Excalibur battery pack.

Works with old & new Excalibur units.

Compatible

• Minelab Excalibur 1000
• Minelab Excalibur 800
• Minelab Excalibur II
• Minelab Excalibur

The previous part number was: 3011-0239.